TrueSeat™ Portable Bearing Press For Onewheel®-compatible boards and VESC builds
By Kwik-O-Matic Tool Company (Patent Pending)
Meet TrueSeat™ — the one-tool toolless wonder for swapping bearings on your Onewheel®, VESC builds ***, and all those XR/GT/Pint rides you ride hard and ride often. Specifically designed to remove and install the 6907-2RS bearings in our boards.
The TrueSeat™ Portable Bearing Press delivers precise, damage-free bearing installation for Onewheel® hubs—without bulky shop equipment. Designed for riders and technicians who want professional results anywhere, TrueSeat applies straight, even pressure to remove and reinstall/ seat bearings perfectly every time.
Say goodbye to improvised heavy presses, hammer installs, and misaligned bearings. TrueSeat™ protects both the bearing and hub by eliminating side-loading and uneven force, helping extend bearing life and ensure smooth, quiet performance. No more shipping your board back to the factory just because you don’t have a 3 ton Arbor Press.
Compact and easy to use, it’s ideal for home garages, mobile repair setups, and on-the-go service. If you’re rebuilding a hub or upgrading bearings, TrueSeat™ gets it done right.
Features & Benefits
True, Square Bearing Installation – Prevents misalignment, premature wear, raceway and seat galling.
Hub & Bearing Safe – Even pressure reduces risk of damage
Portable Design – No vise or hydraulic press required; The size of a “Tall-Boy” and can be done on the tailgate of a pickup (perhaps don’t, but you could).
Fast, Repeatable Results – Perfect for DIY riders and professional service
Purpose-Built for Onewheel® Hubs – This system captures the bearings during extraction, and installation so that it is under control 100% of the operations. This protects the magnets and other sensitive components.
The TrueSeat™ Portable Bearing Press is the smart way to press bearings—clean, controlled, and built for riders who care about doing it right and wherever it is needed.
** Pint and some aftermarket hubs may take a longer mandrel bolt, which is on backorder as of 5/13/26. If purchasing a kit and select pint as your preferred hub, it will be required to self supply a longer bolt (1/2”-20×6-1/2”) at least until the backorder parts are available for produced kits.
***Non “Future Motion” hubs may also take an additional “Open Sourced Capture Cup” $19.99 added to the order to remove bearings from MTE/ TechRails hubs etc. Please add it to your order to avoid extra wait times to swap your bad bearings.
Onewheel® is a registered trademark of Future Motion, Inc.
XR, GT, and Pint are Onewheel® board models.
Kwik-O-Matic Tool Company is not affiliated with or endorsed by Future Motion, Inc.
TrueSeat™ Portable Bearing Press For Onewheel®-compatible boards and VESC builds
By Kwik-O-Matic Tool Company (Patent Pending)
Meet TrueSeat™ — the one-tool toolless wonder for swapping bearings on your Onewheel®, VESC builds ***, and all those XR/GT/Pint rides you ride hard and ride often. Specifically designed to remove and install the 6907-2RS bearings in our boards.
The TrueSeat™ Portable Bearing Press delivers precise, damage-free bearing installation for Onewheel® hubs—without bulky shop equipment. Designed for riders and technicians who want professional results anywhere, TrueSeat applies straight, even pressure to remove and reinstall/ seat bearings perfectly every time.
Say goodbye to improvised heavy presses, hammer installs, and misaligned bearings. TrueSeat™ protects both the bearing and hub by eliminating side-loading and uneven force, helping extend bearing life and ensure smooth, quiet performance. No more shipping your board back to the factory just because you don’t have a 3 ton Arbor Press.
Compact and easy to use, it’s ideal for home garages, mobile repair setups, and on-the-go service. If you’re rebuilding a hub or upgrading bearings, TrueSeat™ gets it done right.
Features & Benefits
True, Square Bearing Installation – Prevents misalignment, premature wear, raceway and seat galling.
Hub & Bearing Safe – Even pressure reduces risk of damage
Portable Design – No vise or hydraulic press required; The size of a “Tall-Boy” and can be done on the tailgate of a pickup (perhaps don’t, but you could).
Fast, Repeatable Results – Perfect for DIY riders and professional service
Purpose-Built for Onewheel® Hubs – This system captures the bearings during extraction, and installation so that it is under control 100% of the operations. This protects the magnets and other sensitive components.
The TrueSeat™ Portable Bearing Press is the smart way to press bearings—clean, controlled, and built for riders who care about doing it right and wherever it is needed.
** Pint and some aftermarket hubs may take a longer mandrel bolt, which is on backorder as of 5/13/26. If purchasing a kit and select pint as your preferred hub, it will be required to self supply a longer bolt (1/2”-20×6-1/2”) at least until the backorder parts are available for produced kits.
***Non “Future Motion” hubs may also take an additional “Open Sourced Capture Cup” $19.99 added to the order to remove bearings from MTE/ TechRails hubs etc. Please add it to your order to avoid extra wait times to swap your bad bearings.
Onewheel® is a registered trademark of Future Motion, Inc.
XR, GT, and Pint are Onewheel® board models.
Kwik-O-Matic Tool Company is not affiliated with or endorsed by Future Motion, Inc.
Image 1 of 20
Image 2 of 20
Image 3 of 20
Image 4 of 20
Image 5 of 20
Image 6 of 20
Image 7 of 20
Image 8 of 20
Image 9 of 20
Image 10 of 20
Image 11 of 20
Image 12 of 20
Image 13 of 20
Image 14 of 20
Image 15 of 20
Image 16 of 20
Image 17 of 20
Image 18 of 20
Image 19 of 20
Image 20 of 20